E-Fill SW Dropper Monobloc for automatic filling, capping and labeling of vials with dropper cap | E-Fill SW Dropper

Designed to offer flexibility in packaging vials from 0.2 to 8.5 oz, the E-Fill SW Dropper is capable of filling, screwing and labeling vials with a pipette cap (such as those used for CBD oils). This all-in-one machine is part of the monobloc range.  To sum up, the E-Fill SW is an automatic filler, screwer and labeler in one.

Using an external vibrating bowl, the E-Fill SW Dropper automatically straightens the caps. The caps are then conveyed into the machine via a vibrating ramp. Everything has been thought out with precision and safety in mind, as a clamp has been added to facilitate guidance and prevent breakage.

There are two ways to use our E-Fill SW Dropper:

• The full automatic mode is preferred for large series of products thanks to its “Pick & Place” system which allows the automatic deposit and screwing of the caps on their container. It is a system that is described as “autonomous”.

• The switch mode is preferred for the packaging of small and medium-sized series of products where the presence of a human is not negligible since the cap is placed manually on the container. The opening is done at the side doors so that the operator can place the caps on the bottles himself. Afterwards, the bottles are automatically capped by a capper. This mode saves a considerable amount of time when packaging small batches, particularly thanks to its easy adjustment system during the change of product format.

This monobloc designed by CDA allows the filling of up to 3,000 bottles per hour, i.e. 50 products/minute for 10 ml formats.

The E-Fill SW Dropper is compatible with a wide range of sectors, including:

• Parapharmacy (solutions, decongestants, etc.),
• Cosmetics (serums, face and body oils, etc.),
• Natural products (essential oils, etc.).

To learn more about our monoblocs and see them in operation, visit our youtube channel.